(1) when the position depth of the thimble is deeply processed, the depth needs to be 0.02mm in depth. The operator USES a thousand points for the measurement, and the tolerance is 0.02~0.01mm, while the side side of the thimble should be processed to the size.
(2) the assembly bit processing size of the inclined top pedestal is made by using the bottom of the thimble panel when the program is processed, and the operator USES a more measured number, while the side processing size is in place.
(3) other locations shall be processed in accordance with the dimensions of 3D drawings.
5. Thimble:
(1) there is the dimension position required by the insert assembly, the operator needs to use the block gauge to fit, and the other positions are processed in accordance with the 3D drawing dimension.
(2) C board: according to the dimensions of 3D drawing, the processing surface and the direction of the processing direction are selected in the positive direction of the type A code of the gong bed group.
(3) nameplate: the engraving is required according to the 3D drawing.
(4) fixed on the board: pumping nozzle assembly requirements of size, are in fixed on the plate at the bottom of the application processing gong dimensioned, operator need correction table number, and the process to open the side compensation, program unilateral to keep 0.02 mm, the operator need to use needle gauge fitting ensure unilateral + 0.015 ~ + 0.01 mm, other sizes according to the 3 d drawing size.
(5) lower fixed plate: with the size of the assembly requirements, the bottom of the lower plate shall be machined to the size, and the side side shall be closely matched with the block gauge, and the other dimensions shall be processed in the 3D drawing.