What problems should be paid attention to when using injection mould?
When injecting plastic parts with plastic injection mold, the following points should be paid attention to:
1) the mould must be cleaned before injection, so as to keep the mold clean and free of foreign material.
2) during the use of the mould, the sliding and movable parts should be lubricated periodically, such as the guide column and guide sleeve surface.
3) after the mold is removed, it is difficult to remove the molds and residual plastic parts. Do not use the metal to pry, but carefully remove the residue with wooden tools.
4) make regular inspection after the mold work.