What are the safety operation technology requirements of mold fitter?
The safety operation technical requirements of die fitter are as follows:
1) do not use unfamiliar equipment and tools without authorization.
2) when using the hand-held pneumatic tool, the joint should be firmly fixed, and the pneumatic grinding wheel should have a complete cover device, and the grinding wheel should be selected correctly according to the specification.
3) when using portable power tools, the plug must be in good condition, the enclosure is grounded and the insulation is reliable.The power must be cut off when changing the grinding wheel and drill bit.In case of failure, use should be stopped.
4) it is forbidden to use a tool with a handle, such as a blade or a spanner, such as a wrench, a slip or a broken tooth.
5) when chipping, grinding, and loading the spring, do not aim at others. When hammering, be careful not to hurt others.
6) pay attention to the position of the center of gravity for the support and clamping of large and deformed workpieces so as to avoid falling or upsetting.
7) do not use hand or mouth to remove the chip.
8) it is forbidden to operate or stop under the working part of the crane.
9) it is strictly prohibited to use portable portable lighting lamps with a voltage source of more than 36V.
10) to repair the mold in place, the machine must be operated after the power is cut off.