Fast clamping positioning system and automation
Above introduced six kinds of mold manufacturing process.In fact, a mold part often requires multiple processes to be manufactured.In this process, the parts need to be constantly clamped and calibrated, which takes a lot of time. The machine tool is also idle, and the processing capacity of expensive equipment is not fully utilized.As competition in the manufacturing sector intensifies.Shorter production cycles are the trend.Foreign jig maker, using a set of stable and precise benchmark system, realized the milling, vehicles and measurement, such as electrical discharge machining process unified benchmark swaps, it takes only a minute or so fast on the machine tool clamping electrode and alignment, repetitive positioning accuracy within the 3 microns, effectively shorten the setting time, great increase in the actual running time of machine tool.It has proved to be an indispensable condition for modern production.The foreign advanced rapid loading and positioning System manufacturers mainly include Swiss GF processing solution System 3R clamp, Swiss EROWA clamp and so on.