ABIS Mold Technology at MD&M West 2026
Book a Meeting with Our Team in Anaheim
Exhibition Details
| Show | MD&M West 2026, Plastics Sector (formerly PLASTEC West) |
| Dates | February 3-5, 2026 (Tuesday to Thursday) |
| Hours | Tue & Wed: 10:00 AM - 5:00 PM / Thu: 10:00 AM - 4:00 PM |
| Booth | Hall E, Booth 3717 |
| Venue | Anaheim Convention Center, 800 W Katella Ave, Anaheim, CA 92802 |
| Scale | 1,700+ Exhibitors, 13,800+ Attendees, 43 Countries |
MD&M West 2026 now combines PLASTEC West, ATX West, D&M West, and WestPack into one event. One badge gets you access to all five sectors.
Schedule a Meeting
ABIS Mold Technology will be at MD&M West 2026. We're inviting customers and potential partners to book a meeting slot with our engineering and project team.
If you're working on a new product, evaluating mold suppliers, or looking to improve an existing project, a focused 30-60 minute conversation can save weeks of email exchanges. Bring your questions and drawings. We'll bring specific answers.
Walk-ins are also welcome at Hall E, Booth 3717 during show hours.
Why We Recommend Booking Your Meeting in Advance
Trade shows get busy. Without a scheduled slot, you may end up waiting or only getting a few minutes of surface-level conversation.
Pre-booking gives you:
| Dedicated time | 30-60 minutes of uninterrupted discussion |
| The right people | We'll assign engineers, project managers, or industry specialists based on your needs |
| Prepared feedback | Send drawings or specs beforehand and we'll come with initial DFM observations |
| Privacy if needed | NDA signing and private meeting space available on request |
What Can We Dive Into During Our Meeting?
Mold Engineering
- Mold structure review: parting line, ejection, gate location, venting
- Multi-cavity mold design and production risk assessment
- Two-shot molding, insert molding, overmolding feasibility
- Surface options: textures, polish grades, plating, coating
Production Planning
- Path from T0 sampling to pilot run to volume production
- Material selection: thermal, chemical, optical, flame retardant, biocompatible
- Cost breakdown: tooling, unit cost, volume optimization
- Capacity: we run two molding workshops with 28T to 1600T presses
Industry-Specific Topics
Medical: Cleanroom capability, FDA pathway, biocompatible materials, ISO 13485 documentation
Automotive: PPAP preparation, IATF 16949 support, tight tolerance work (±0.01mm)
Electronics: High-volume scaling, cosmetic requirements, fast turnaround
Bring Your Project
- 3D/2D files, samples, or competitor parts for on-the-spot review
- Current issues: warpage, sink marks, flash, fit problems, yield concerns
- Ideas for cost reduction or lead time improvement
Who Would Benefit Most from a One-on-One Conversation?
| Role | What we can cover |
|---|---|
| R&D / Engineering | DFM review, mold optimization, material advice, prototyping options |
| Procurement / Supply Chain | Supplier evaluation, capacity planning, cost comparison, partnership terms |
| OEMs / Brand Owners | Full development-to-production scope, quality audits, compliance support |
| Existing Customers | Project updates, yield improvements, cost reviews, new project discussions |
How Can We Make Booking Your Meeting Simple and Fast?
Step 1
Email mike@abismold.com or nancy@abismold.com with your preferred times (give us 2-3 options) and a brief note on what you'd like to discuss.
Step 2 (optional but helpful)
Attach any relevant files: drawings (STEP, IGES, Parasolid), product specs, volume estimates, timeline, budget range.
Step 3
We'll confirm within 24 hours and let you know who will be at the meeting.
If you can't make it to Anaheim, we're happy to set up a video call instead. Just mention that in your email.
What Should You Bring to Get the Most Valuable Feedback?
Drawings or samples (competitor parts work too)
Your priority list: cost, timeline, surface finish, material, tolerances, assembly fit
Volume estimates and launch schedule
Any current problems you're trying to solve
About ABIS
ABIS Mold Technology, founded in 1996 in Shenzhen, China, provides mold development and injection molding services. We work with manufacturers to take products from design to production.
Company Profile
| Founded | 1996 |
| Molds delivered | 2,400+ sets to 38 countries |
| Customers served | 3,000+ |
| Annual mold capacity | 400+ sets |
| Team size | 100+ engineers and production staff |
| Facility | 12,000 m² |
How Can ABIS Support Your Precision Mold Projects?
Mold Making
Injection molds, two-shot molds, insert molds, overmolds, hot runner molds, die casting molds (aluminum and zinc), stamping dies. Mold life up to 1,000,000 shots. Design tools: SolidWorks, Pro/E, UG, Moldflow.
Injection Molding
28T to 1,600T presses. Precision to ±0.0005 inch (±0.0127mm). Class 8 cleanroom for medical parts. Insert molding, overmolding, micro-molding, large parts up to 100 lbs.
Materials
Engineering plastics: ABS, PC, PA, POM, PEEK, PBT, PMMA, TPE. Medical-grade and biocompatible options. Die casting alloys: aluminum (A380, A360), zinc (Zamak 3, 5, 7). MIM: stainless steel, copper alloys.
Certifications
| Certification | Scope |
|---|---|
| ISO 9001 | Quality Management |
| IATF 16949 | Automotive |
| ISO 13485 | Medical Devices |
| ISO 14001 | Environmental |
| AS9100 | Aerospace |
| FDA Registered | Medical Facility |
Industries
Medical and healthcare (surgical tools, diagnostics, drug delivery), automotive and EV (interior parts, connectors, transmission components), consumer electronics (housings, connectors), home appliances, aerospace.
Project Examples
Medical: Micro Surgical Components
A medical device company needed parts under 2mm diameter with tight quality control. We developed a micro-injection process with optimized cooling. Result: 40% faster cycle time, 99.2% yield.
Automotive: EV Charging Connector
An EV manufacturer wanted to reduce weight without losing strength. We used two-shot molding with a revised material combination. Result: 25% lighter, 18% lower cost per unit.
Electronics: High-Volume Housings
A consumer electronics brand needed to scale from prototype to mass production quickly. We provided the tooling upgrade path and capacity ramp-up plan. Result: reached 1.2 million units per month within 3 months.
Working with ABIS
| Common challenge | How we address it |
|---|---|
| Long mold lead times | Standard molds in 45-60 days, rapid prototypes in 3 days |
| Managing multiple vendors | One-stop: DFM, tooling, molding, assembly, packaging |
| Industry certification requirements | ISO 13485, IATF 16949, FDA, AS9100 certified |
| Difficult geometries | Two-shot, insert molding, overmolding; ±0.01mm capability |
| Communication concerns | English-speaking engineering team, quotes in 2 days, 28 years in export markets |
| Scaling from prototype to production | 28T-1600T presses, support from 50 pieces to 1M+ monthly |
Typical Timelines
| Quotation | 2 business days |
| Rapid prototype | 3 days |
| Pilot run (up to 1,000 pcs) | 2 weeks |
| Production mold | 45-60 business days |
Contact
| mike@abismold.com, nancy@abismold.com | |
| Phone | Kelly: +86 13682636597, Aaron: +86 13828810589 |
| +86 13751017242 | |
| Website | www.abismould.com |
| Virtual Tour | https://www.linked-reality.com/company/15504/en |
FAQ
Q: I don't have drawings yet, just an idea. Can we still meet?
A: Yes. We can discuss requirements and give you initial direction even at the concept stage.
Q: Do you take small orders?
A: Yes. We handle everything from 50-piece prototypes to million-unit production runs.
Q: How do you handle confidentiality?
A: We can sign NDAs before detailed discussions. Your information stays protected.
Q: What if I can't attend in person?
A: We can do a video call. Just let us know when you email.
Q: Do you do both mold making and molding?
A: Yes. That's what we specialize in. One supplier from tooling through production.
See You There
Hall E, Booth 3717
February 3-5, 2026
Email: mike@abismold.com or nancy@abismold.com
ABIS Mold Technology Co., Ltd
www.abismould.com