What should be paid attention to when using die forming plastic parts?
The following problems should be paid attention to when making molded plastic parts by pressing mould:
1) during the use of the mould, the temperature change should be even, and must not be too cold or overheated.
2) when unloading, prevent scratches and plastic parts.Before pressing, it is necessary to carefully check if there are any embedded parts or residues in the cavity to prevent damage to the mold when pressed.
3) after the plastic parts are unloaded, apply the release agent properly.
4) after the mold is used for a period of time, clean the dirt and impurities around the mold regularly.
5) in the process of use, the mould should be lubricated periodically with the active part and the guiding part.