Precautions for using special molding tools
1. Different types of machine sliders have different stroke, so it is necessary to pay attention to the adjustment of the sealing height of the forming mold.
2. Make sure that the molding is sufficient, so it needs careful adjustment. The adjustment amount should not exceed 0.15mm each time.
3. For stretch molding, please choose light spring assembly to prevent tearing of sheet stock or difficulty in discharging due to uneven deformation.Full technology WeChat content is really good, worthy of attention!!
4. Install ball support molds around the forming molds to prevent the plate from tilting.
5. The molding position should be as far away from the clamp as possible.
6. It is better to finish the shaping process at the end.
7. Ensure good lubrication of plates.
8. When ordering, pay attention to the problem of special molding tools. If the two molding tools are close to each other, please be sure to communicate with our salesmen.
9. Because the molding tool needs a long unloading time, it is necessary to use low speed and preferably have a delay.