Zamak 5 Automotive Zinc Alloy Die Casting Mold

Name: China Zamak 5 Automotive Zinc Alloy Die Casting Mold Suppliers and Factory - Shenzhen Zamak 5 Automotive Zinc Alloy Die Casting Mold Manufacturers - ABIS Mold
Brand: ABIS
SKU: 42815025

Low-pressure permanent mold (LPPM) casting uses a gas at low pressure, usually between 3 and 15 psi (20 to 100 kPa) to push the molten metal into the mold cavity. The pressure is applied to the top of the pool of liquid, which forces the molten metal up a refractory pouring tube and finally into the bottom of the mold. The pouring tube extends to the bottom of the ladle so that the material being pushed into the mold is exceptionally clean. No risers are required because the applied pressure forces molten metal in to compensate for shrinkage. Yields are usually greater than 85% because there is no riser and any metal in the pouring tube just falls back into the ladle for reuse.

Send Inquiry

Series Motor Core And Mould

Die Casting Of Achieving Perfection

Description

ABIS Mold Technology Co., Ltd. is one of the leading manufacturers and suppliers of zamak 5 automotive zinc alloy die casting mold in China. Please feel free to buy high quality zamak 5 automotive zinc alloy die casting mold made in China here from our factory. Welcome to view our website for more information.

Basic Info

Mould Life: <500,000 or >500,000

Certification: ISO9001-2008

Customized: Customized

Condition: New Part Material: Zamk 5 Zinc Alloy

Cavity Number: 1+1+1+1

Structure: Two-Plate Mold

First Shot Sample Time: 30 Calender Days

Trademark: Win Win Mold

Transport Package: Polywood Case & Pallet

Specification: 301*230*300mm

Origin: Shenzhen