ABIS Mold Technology Co., Ltd. is one of the leading manufacturers and suppliers of Custom Plastic Hair Brush & Comb Injection Mold in China. Please feel free to buy high quality Custom Plastic Hair Brush & Comb Injection Mold made in China here from our factory. Welcome to view our website for more information.
Custom Hair Brush and Comb Mold for OEM Beauty Care Products
For a custom hair brush comb mold project, the key is not only the mold steel or cavity number, but whether the final product can keep stable teeth, smooth edges, comfortable grip and consistent appearance during repeated injection molding. ABIS can support OEM and ODM buyers who need plastic combs, paddle brush bodies, detangling brush frames, massage comb shells or personal care accessories with customized color, logo area, surface texture and packaging requirements.
Different brush and comb designs require different mold solutions. A simple plastic comb may focus on thin tooth filling, straightness and burr control, while a hair brush body often needs stronger handle structure, balanced cooling, stable ejection and good surface finish. Before mold making, our engineering team can review the product drawing or sample to check wall thickness, draft angle, gate position, parting line, shrinkage risk and possible deformation areas, helping customers reduce trial corrections and shorten the path from sample confirmation to mass production.
Mould Details
Mould material:45#, P20, H13, 718H, S136,2738, NAK80, etc.
Mould base:LKM, HASCO, DME etc.
Cavity: Single or multi
Runner system:Hot runner or cold runner
Mould design: UG, PRO-E, CAD, SolidWorks etc.
Mould precision:±0.01mm
Mould life: About 500K shots
Lead time:25-35days
Design Points for Hair Brush and Comb Injection Molding
In hair brush and comb injection molding, the comb teeth and brush ribs are usually the most sensitive areas. Long and thin teeth can be difficult to fill evenly, and poor cooling balance may cause warpage, sink marks or tooth deformation after demolding. For this reason, the mold design should consider proper gate location, runner balance, venting, cooling channel layout and polished cavity surfaces, especially when the product has dense teeth, narrow slots or a curved handle shape.
For a molding comb project with higher appearance requirements, the mold surface treatment and ejection design are also important. Smooth cavity polishing can help reduce visible flow marks and improve the hand feel of the final comb, while a reasonable ejector layout can lower the risk of whitening, scratches or tooth damage. If the customer needs a multi-cavity mold for wholesale orders, ABIS can evaluate cavity balance and part consistency before mold manufacturing.
Plastic and Rubber Options for Hairbrush Mold Projects
Common plastic materials for hair brush and comb parts include PP, ABS, PE, PS, PA and other engineering plastics, depending on the requested flexibility, stiffness, surface finish and cost target. For products that need a softer touch or anti-slip handle, rubber molding hairbrushes can be developed with TPE, TPR or similar soft-touch materials through overmolding or two-shot molding, subject to the product structure and bonding requirements.
When buyers compare plastic-only brush bodies with TPE overmolded handles, the decision usually depends on brand positioning and end-use scenario. A rigid PP or ABS comb is suitable for cost-sensitive daily-use products, while a soft-grip hair brush handle can improve comfort for salon, shower, travel or retail beauty care products. ABIS can help customers review the material combination, shrinkage difference and mold structure before opening the tool.
Process for customized mold
1. Customers will provide 3D drawings or sample inquiry, and we will quote according to 3D drawings or samples.
2. Negotiations include mold price, mold quality, mold material, mold cavity material, mold size, surface effects, technical requirements, mold life, warranty period, product weight, product cost, delivery time, logistics mode, payment mode, etc.
What Information Helps Us Quote a Hair Brush Comb Mold Faster?
To quote a hair brush or comb mold more accurately, customers can send a 3D file, 2D drawing, physical sample or reference product photo, together with the expected plastic material, product size, surface finish, logo position, color requirement, target annual quantity and preferred cavity number. If the project is still at the idea stage, ABIS can also discuss basic product structure and manufacturability before the formal mold quotation.
For buyers who are comparing a single-cavity tool with a multi-cavity production mold, the final choice should be based on order volume, unit cost target, injection machine capacity and delivery plan. A lower-cost trial mold may be suitable for early market testing, while a multi-cavity mold is usually better for stable bulk orders that need consistent output and shorter molding cycle time.
3. Confirm the order. Proforma invoice or commercial invoice.
4. T/T deposit. 50% T/T in advance, balance before shipment.
5. DFM (Design For Manufacturing), Ensure quality. Mould design, mould drawing confirmation.
DFM Review for Comb Teeth, Brush Handle and Cleanable Structure
During the DFM stage, ABIS checks whether the product structure is suitable for stable injection molding, including comb tooth thickness, handle strength, rib layout, snap-fit area, hole position, logo engraving and possible undercuts. For hair brushes used in wet environments, the design can also be reviewed for water drainage, smooth transitions and fewer dirt-trapping corners, which helps the final product become easier to clean and more acceptable for retail users.
Some searchers use phrases such as mold on hair brush when they are actually concerned about mildew or dirt buildup on the finished brush. From a manufacturing point of view, this issue can often be reduced by better product structure, smoother surfaces, proper drainage gaps and material choices that are easier to wash and dry. For brand owners, these details can become practical selling points instead of only cosmetic features.
6. Mold processing. Feedback the processing progress every week, we will show you the pictures of mold processing.
7. Sample confirmation. Express sample, confirm sample, mass production.
8. Product packaging. Wooden case, carton or custom made.
9. Delivery. By Sea, By air, etc. Pay the balance
ABIS mold company have over 120 employees with professional designer team & engineers team to offer services and solutions from design to finish product.
Two molding rooms Press machine range from 80T to 1600T.
400+ molds capacity each year, and 65% exported (mainly to Europe and North America).
We are focuced on plastic injection mold and molding, develope products and also provide stamping/ punching, blowing molds, die casting molds, as well as the secondary process.
This is Nancy here, I have 6 years experience as a mold designer and 3 years working as a project manager.Welcome to contact with me anytime:
Nancy zhang(International sales)
ABIS Mold Technology Co.,Ltd.
Tel:0086-75589984896
Phone/WeChat/WhatsApp:+86 17727582624
Email:nancy@abismold.com
Web:www.abismold.com
Add:B Building, YingkeLi Area, Longdong Community, Longgang District, ShenZhen, China 518116.
We are focuced on plastic injection mold and molding, and we developed some types of electronic products with customers and ourselves, and we also provide stamping/ punching, blowing molds, die casting molds, as well as the secondary process.
FAQ
Q: Do you sell used molds?
A: No, we don't. Custom-made molds are our main business
Q: How about the production time?
A: 20-25days for making molds, 2days for testing molds, 10-15days for buck production and it depends on mold structure & order quantity.
Q: What service do you provide?
A: Design 3D Drawing, Make 3D Print Sample, CNC Parts, Develop Injection Plastic Mold, Supply Plastic Prodcuts & Parts etc
Q: How do you make our business long-term and a good relationship?
A: We keep good quality and competitive prices to ensure our customer's benefit.
Q: What does mold in hair brush mean?
A: In daily search, this phrase may refer to mildew on a used hair brush, but in manufacturing it usually means the injection mold used to produce the brush body, comb teeth, handle or cushion structure. If you are developing a new hair brush product, ABIS focuses on the tooling side, including mold design, mold making, trial samples and plastic part production.
Q: Is hair mold on brush the same as a hair brush mold?
A: No. Hair mold on brush usually describes dirt, moisture or mildew on a finished consumer product, while a hair brush mold is the production tool used to form plastic or rubber parts. For OEM buyers, a good mold design can still help by making the finished brush smoother, easier to rinse and less likely to trap water in unnecessary corners.
Q: Can ABIS make plastic combs and soft-grip hairbrush handles?
A: Yes. ABIS can support plastic comb molds, brush body molds and soft-grip handle projects according to the customer's drawing, sample or product idea. For TPE or TPR grip areas, our team will review the bonding surface, shrinkage, parting line and molding sequence before confirming whether overmolding or two-shot molding is more suitable.
Q: What should I prepare before ordering a custom hair brush comb mold?
A: The best starting information includes a 3D drawing or sample, product size, material request, color, surface texture, logo area, expected cavity number and target quantity. With these details, ABIS can evaluate mold structure, estimated lead time, trial sample plan and production feasibility more efficiently.
Hot Tags: Custom Plastic Hair Brush & Comb Injection Mold, China, Shenzhen, manufacturers, suppliers, factory, eingespritztes Autobauteil, Customized design of mold, double shot mold on auto parts, PET container, plastic mold, Bottle blow mould
