Industry knowledge

How to deal with the shrinkage of injection molding products

Most people know that the mold temperature is too high to cause shrinkage problems, and usually prefer to lower the mold temperature to solve the problem. But sometimes if the mold

Jan 06, 2022

Key points of design of injection mold for shielding cover

The product diagram of the shielding cover is shown in Figure 1. The maximum size of the product is ø85.7 mm x 55.20 mm, the average thickness of the plastic part is 1.50 mm, the m

Mar 10, 2021

How to avoid the flush of PC product

How to avoid the flush of PC product?The flushing at the nozzle is generally due to the decomposition of the raw material and the generation of gas due to the shearing and overheat

Jul 14, 2020

The factors that affect product molding in the process of injection molding

Jan 15, 2020

Quote for plastic injection mold at factory

when we get a inquiry info then we will send the quotation within two days. during this time we will calutae the mold price. total 7 steps.see details.

Jan 14, 2020

what-is-rotating insert mold

Jan 13, 2020

How to solve the welding line in the plastic injeciton molding

Some moldflow or molded products shows the welding lines or welding marks. how to avoid it? see the details below.

Jan 10, 2020

Notes for plastic mold assembly

Jan 09, 2020