We meet many types of shrinkage issues, some places can solve it by machine parameter, but some places need to change the part design. see following how to avoid shrinkage.
Jul 06, 2022
When forming PC thick-walled products, the control of mold temperature is particularly important.
Oct 18, 2021
Sink Mark -- Referance to Plastic Wall Thickness
Dec 26, 2019
Polyethylene is odorless, non-toxic, feels like wax, has excellent low temperature resistance (minimum use temperature can reach -70 ~ -100 ℃), good chemical stability, can withsta
Dec 23, 2019
The different color for different load and compression ratio. See below picture that you can see the yellow spring is lower load and 40% compression ratio in 1000K times injection
Dec 17, 2019
Non-toxic, odorless, low degree, strength stiffness, hardness and heat resistance are better than low pressure polyethylene, can be used at about 100 degrees. Has good electrical p
Features: 1.Comprehensive performance, high impact strength, chemical stability, and good electrical properties. 2.Good fusion with 372 plexiglass, made of two-color plastic part
HASCO is produced from Germany and is a metric unit, the metric system; DME is produced from the United States and is an English unit. MISUMI is made in Japan and is also metric s