ABIS Mold Technology Co., Ltd. is one of the leading manufacturers and suppliers of Blood Collection Tube Mold in China. Please feel free to buy high quality Blood Collection Tube Mold made in China here from our factory. Welcome to view our website for more information.
Quick Details
Product name: Blood Collection Tube Plastic Injection Mold
Mold material: Stainless Steel ASSAB STAVAX S136
Properties: Medical Materials & Accessories
Place of Origin: Shenzhen, China
Brand Name: OEM
Model Number: ABIS20-121
Keyword: medical vacuum blood collection tube
Additive: 3.8% Sodium Citrate
Nominal Volume: 1.6-3ml
Tube Specification: 13*75mm,9*120mm
Material: Plastic, PET
Color: according to your requirement
Package: according to your requirement
Application: various Automated Erythrocyte Sedimentation Rate Analyzers
Certification ISO, TS
Supply Ability: 33000000 Piece/Pieces per Month vacuum blood collection tube
The mold accommodates standard tube specifications - 13×75 mm and 13×100 mm for routine blood analysis tube molds, as well as 16×100 mm for higher-volume draws - and can be retooled for custom OD/length combinations on request. Material-wise, PET remains the dominant resin for vacuum blood collection tubes because of its optical clarity, chemical resistance, and ability to maintain internal vacuum over shelf life. For non-vacuum applications and certain coagulation test tubes, PP is also processed in the same mould platform with adjusted gate sizing and cooling parameters. Where clients require injection molded plastic tubes produced from PVC compounds - common in transfusion set components and drainage line connectors - we supply dedicated PVC blood tube mold tooling with corrosion-resistant cavity surfaces and low-compression-ratio screws to handle the material's thermal sensitivity.
PVC-based blood tubing - used primarily in transfusion lines, dialysis circuits, and extracorporeal blood loops - requires a different mold engineering approach than PET vacuum tubes. PVC's lower processing window and tendency to degrade at elevated temperatures mean the mold must incorporate low-shear gate geometries and precisely zoned cooling to avoid material discoloration or release of HCl gas. As a mold for transfusion pipe plastic factory based in Shenzhen, ABIS builds these tools with chrome-plated cavity surfaces to resist the corrosive byproducts of PVC processing, extending mold service life past 2 million cycles.
Packaging & Delivery
Packaging Details: Furmigation wood carton or cardboard carton
Port: Shenzhen
Lead Time :
|
Quantity(Pieces) |
1 - 10000 |
>10000 |
|
Est. Time(days) |
10-25 |
To be negotiated |
ABIS mold company have over 100 employees with professional designer team & engineers team to offer service and solutions from design to finish product.
Two molding rooms Press machie range from 80T to 1600T.
400+ molds capacity each year, and 65% exported (mainly to Europe and North America).
We are focuced on plastic injection mold and molding, develope products and also provide stamping/ punching, blowing molds, die casting molds, as well as the secondary process.
For medical tube production specifically, our molding rooms run under controlled environment conditions that meet the cleanliness levels required by ISO 13485-certified end users. The injection molded tube leaving the press goes through automated vision inspection for concentricity, overall length, and surface defects before packaging - a step that catches the kind of barrel bow and gate vestige issues inherent to long, thin-walled PET parts. We also run mold-flow simulation during the DFM stage to predict and preempt problems like uneven fill, weld lines near the tube rim, and grease bleeding in injection molding cavities caused by excessive lubrication on ejector pins. Addressing these risks at the tool design phase rather than on the production floor is what keeps reject rates below 0.3% across high-cavity blood collection tube production runs.
In medical tube moulding, bleeding in injection molding refers to lubricant or grease migrating from ejector pins, slides, or guide bushings into the cavity, contaminating the molded part surface. For blood collection tubes that must meet sterile packaging requirements, even trace grease contamination is a batch-rejection event. ABIS addresses this through dry-film coated ejector components and minimal-lubrication mold design, eliminating the grease bleed-out path that causes splay marks and surface haze on finished tubes.
Beyond blood collection, the same precision mould engineering extends to adjacent medical disposable tooling. We manufacture mold for transfusion pipe plastic fittings - including drip chamber shells, Y-connectors, and Luer-lock adapters - where biocompatibility requirements overlap significantly with those of blood tubes. Clients sourcing a blood collection tube injection mould from ABIS often bundle transfusion set component tooling into the same project to consolidate validation timelines and reduce per-mold logistics cost. This cross-product mold capability also covers other injection instrument components used in clinical sampling workflows, from capillary micro-tubes to serum separator inserts.
This is Nancy here, I have 6 years experience as a mold designer and 3 years working as a project manager.Welcome to contact with me anytime:
Nancy zhang(International sales)
ABIS Mold Technology Co.,Ltd.
Tel:0086-75589984896
Phone/WeChat/WhatsApp:+86 17727582624
Email:nancy@abismold.com
Web:www.abismold.com
Add:B Building, YingkeLi Area, Longdong Community, Longgang District, ShenZhen, China 518116.
We are focuced on plastic injection mold and molding, and we developed some types of electronic products with customers and ourselves, and we also provide stamping/ punching, blowing molds, die casting molds, as well as the secondary process.
Hot Tags: Blood Collection Tube Mold, China, Shenzhen, manufacturers, suppliers, factory
