How to deal with the Auto mould standard parts

Punch and cover: most of the punching and punching bags used in the standard parts of automobile mold are standard parts, and the car dies are prone to break, bend and bite in the process of use.Set of is usually to break. The punch and impact damage is generally with the same specifications of the parts for replacement. The parameters of the punch are mainly working parts size, installation size, length, size, etc.

Fastening parts: check whether the fastening parts are loose or damaged. The method is to replace the parts with the same specifications.

Press materials and unloading parts: pressure material parts such as pressing plate, excellent glue, unloading parts such as unloading plate, pneumatic top feeding device, etc.Check the assembly relationship and damage of all parts during maintenance, and repair the damaged parts.Pneumatic top material check for air leakage, and take measures for specific situations, such as replacement of windpipe damage.

Spring elastic components such as: in the process of using, spring is one of the most easily damaged parts in auto mould, usually appear fracture and deformation phenomenon. The way is to change, but it is important to note that in the process of replacement of the specifications of the spring and model, a spring of the specifications of the model is determined by three color, diameter and length, only in the case of the three are the same can be replaced.