ABIS Mold Technology Co.,Ltd
Home > Industry knowledge > Content
Product Categories

Contact:Kelly Dai

Position:Sales Manager



Industry knowledge

How to control Mold temperature

ABIS Mold Technology Co.,Ltd Updated: May 08, 2018

Mould in prenatal should be preheated to a certainty temperature, otherwise when chilling during high temperature liquid metal filling and incur mould inside layer temperature gradient increases, thermal stress, cracks make mould appearance, even cracking.

In the process of production, the mold temperature is raised from time to time, and when the mold temperature is overheated, the mould can easily be stuck, and the moving parts will fall off and cause the appearance of the mould to be damaged.

The cooling temperature control system should be set up, and the temperature of mould task should be kept within the necessary limits.

Home | About Us | Products | Capabilities | Industry knowledge | Contact Us | News | Feedback | FAQ | Mobile | XML